Skip to content
Auburn MillsLocksmith Co. · NassauOpen 24/7(249) 494-5980Request a visit
Technician inspecting splintered wood around a door-frame strike plate. — Break-In Damage Lock Repair, Nassau

Lockouts · Nassau

Break-In Damage Lock Repair in Nassau

Police have come and gone, the occurrence number is on a sticky note, and you are standing in a cold hallway looking at a splintered frame, wondering how the house gets locked before everyone tries to sleep.

Break-In Damage Lock Repair

In plain words

When a home is broken into, the locks are not the only thing that has changed hands. Keys hanging in the hall, a spare in a drawer, a garage remote on a visor or a house key on a stolen car's ring may all be gone. Part of break-in damage repair is closing that door too. Every cylinder those keys fit is rekeyed or replaced and fresh keys are cut, the mailbox and padlocks are considered, and you are reminded to reset the garage opener and any alarm codes that were written down. The forced door gets fixed, and the missing keys stop mattering at the same time.

Sound familiar?

Someone smashed the little window beside the door, reached in and turned the thumb-turn. The lock itself is fine, but there is glass on the mat, a hole in the sidelight and a deadbolt anyone can reach.

How the visit goes

Nassau

How the visit goes

  1. Lock, frame or door: which one failed

    Three components can fail in a forced entry and they are repaired differently, so the locksmith sorts them out before quoting. Lock failure is a broken cylinder, bolt or latch and is answered with hardware. Frame failure is a torn strike or split jamb and is answered with a boxed strike, repair plates, long screws and sometimes new wood. Door failure is a crushed edge, a split around the bore or a bent hinge leaf and is answered with edge reinforcement or, when the slab itself is broken, a door installer. Naming which of the three happened, and often all three, shows you what the locksmith completes tonight and what is handed to another trade.

  2. Repairing a split jamb

    A jamb that has split along the grain can often be saved. The loose section is pressed back into place and glued with a two-part wood epoxy that cures harder than the surrounding wood, then clamped while the strike box is fitted through it into the stud so the screws hold the repair as well as the strike. Missing wood is built up with filler or a fitted piece of matching stock and dressed flush. When the jamb has pulled away from the framing along its length or shattered around the pocket, the locksmith says so and arranges a new jamb leg through a carpenter, with temporary securing to see the household through until then.

  3. Watching the repair settle

    Wood that has been split and glued back, and screws that have been driven into fresh pilot holes, settle over their first few weeks. Check after a month that the bolt still throws without effort and that the strike and hinge screws are snug, then repeat at each change of season, since humidity swells doors in summer and shrinks them in dry winter air. A door that starts to need a shoulder, or a bolt that begins to catch on the strike lip, is asking for a small adjustment before it becomes a problem. Whatever lubricant and interval that new cylinder's own maker specifies keeps the key turning cleanly.

Break-In Damage Lock Repair

In the van

  • Three-inch strike and hinge screws
  • Replacement cylinder or core
  • Hinge reinforcement plate
  • Jamb repair plate
  • Latch guard plate

What affects the quote

Same fees day, night or weekend

  1. 1Lock failure or frame failure

    Replacing a lock is hardware and fitting time. Rebuilding a strike side with a boxed strike, epoxy and long screws into the stud is carpentry as well, and is quoted as its own line.

  2. 2Grade of the replacement deadbolt

    A residential deadbolt with a one-inch throw and hardened insert, a heavier commercial-grade unit and a keypad or smart deadbolt sit at different points, and the quote names the one you choose.

  3. 3Sliding door hardware

    Putting a slider back on its track, replacing its latch and adding anti-lift blocks, a foot bolt or an auxiliary lock is a different parts list from a hinged door, and is quoted as such.

What to have ready

0 of 3 ready

Call (249) 494-5980

Break-In Damage Lock Repair: questions

Should I upgrade to a stronger deadbolt while you are here?

It is the natural moment, because the door is already open for repair. A deadbolt with a full one-inch throw, a hardened insert against sawing and a low-profile face that resists a wrench grip, graded to a recognised durability standard, takes little extra effort to fit now compared with a return visit. Pair it with the reinforced strike and long screws and the door becomes hard to attack from any side. The choice is yours; the locksmith shows the options and lets you decide.

My condo entry door is a fire-rated door. Does that change the repair?

Yes, in a good way. A suite door that opens onto a corridor is meant to close and latch on its own every time, so the repair uses hardware suited to a labelled fire door, keeps the self-closing device adjusted and operating, and adds no holes or plates the label does not allow. The building's manager is normally involved, and the locksmith works with the door's rating rather than around it.

The intruder pried open our sliding patio door. Can it be made secure?

Yes. The panel goes back on its track and the broken latch is replaced, then the weaknesses a slider is born with are addressed: anti-lift blocks in the upper channel so the panel cannot be raised off its rollers, a foot bolt or pin lock through the frame at the bottom, and an auxiliary keyed lock if the latch alone is flimsy. A bowed frame may need a door installer, with the opening secured until they come.

Lockout Services

Break-In Damage Lock Repair near you

Below, each lock and key service we offer in Nassau gets its own page, with a description that assumes no prior knowledge. Start anywhere. Many customers arrive for a lockout and leave knowing exactly why the strike plate on the back door has bothered them for years.

Open 24/7 · call(249) 494-5980Request a visit